Gear and Accessories

The Ass Savers foldable fender hides under your saddle till you need it, then when it rains, you just unfurl it and go. Or if you don't want to have it tucked under your seat, just let it ride in your backpack. It's flat, doesn't take up much space, and can really come in handy. - Dimensions: 340 X 100mm - Material: 100% recyclable polypropylene - Weight: 15g

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - Carrier plate for rear racks that are not MIK ready. - Adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

Pasja - Dog basket: - Easy to mount on any bike, including e-bikes - Supplied with MIK adapter plate - Made of durable reed and includes a comfortable and washable cushion - Compatible with the Basil Pasja space frame wire dome (not included) - Dimensions (cm): 45 x 34 x 33

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

- Comfortable and durable kraton rubber with a classic micro diamond knurled surface - 130mm length with closed end and BMX style flange

- Forged alloy brake levers with reach adjustment - Compatible with linear pull and mechanical disc brakes - Left/Right: Set - Fits 22.2mm (7/8") handlebars

Campagnolo's Athena Front Derailleur is compatible with both standard and compact cranksets. Its steel cage moves the chain effortlessly between the chainrings and it features an anti-friction coating for quiet, sublimely smooth shifting.

Campagnolo Cable Anchor Assembly Caliper Brake Part

The Campagnolo Chorus front derailleur provides immediate, responsive upshifting with extreme precision. - Upper semi-rod not connected to the lower one for more effective, precise movement and no contact with travel limit - The derailleur stops transmission contact and friction to improve maximum cross-chaining situations - Designed to accommodate tires up to 32mm without the risk of contact with the derailleur - Double-position fixing of the cable allows for maximum compatibility with frames and tires - An optimized position for every engaged sprocket means limited risk of contact with the chain Specifications: - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Campy Centaur/Potenza/Chorus/Record/Super Record 2015+ - Max Ring (teeth): 52 - Front Derailleur Style: Traditional - Front Derailleur Cable Pull: Bottom Pull - Front Derailleur Clamp: Braze-on - Drivetrain Speeds: 12

- 52 tooth 11 speed Campagnolo chainring, for use with 36 tooth threaded inner chainring - Compatible with 2011-2014 Super Record, Record, Chorus and Comp Ultra cranksets - 110mm BCD

Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.

Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm

- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components - Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections - Ultra-Torque OS Fit BB-cup tool is required for adapter installation

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm

- Brake Pad Inserts: Designed for eeBrakes - Compatible with SRAM / Shimano systems - Light Blue – Aluminum Compound - Dark Blue – Carbon Compound - 11g per set

A Better Short Shorts are an obsession at Castelli. They're the most vital piece of clothing and one of the hardest to get right. Even though the Prima is our entry-level short, it shows that we won't compromise anything for comfort and performance. It starts with the women's-specific KISS Air2 seat pad. Just the name gives an idea of the process of constant improvement, which started with a soft KISS pad that was improved by making it more breathable (Air) and then improved again in the latest update to use the softest-ever top fabric (2). It's ready for your next big ride indoors or out. We've updated the fabric to the new Pro Dry Soft, which has a smooth matte finish that feels cool on the skin while being very supportive and quick to dry. We wanted this short to be just right for many years to come, so little details like the reflective patches are stitched in instead of being glued on, and the GIRO3 elastic has the grip woven right into the fabric. This attention to detail — go ahead and call it an obsession — is why Castelli's entry-level short is just a better short. - KISS Air2 seat pad for all-day comfort - Pro Dry Soft matte Lycra is sleek looking and ultra-breathable - Anatomic construction for perfect fit - Rear reflective panels - GIRO3 engineered flat leg band - 15°-35°C / 59°-95°F - Weight: 160g

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

The combination of fast and medium-burning carbohydrates in Clif’s Energy Gels provides you with a steady stream of usable fuel during workouts and races. Electrolytes help balance your fluid levels, while caffeine in three of the flavors gives a boost to your central nervous system and releases free fatty acids into your bloodstream, which can help spare your body’s limited glycogen stores. Clif uses 90% organic ingredients and a thin consistency that goes down easy in both hot and cold weather. Even the packaging has a special touch—the opening is narrow and has a litter-resistant leash, the corners are rounded for jersey pocket comfort, and each packet has a reduced carbon footprint.

Continental's Gatorskin is a super long-wearing and reliable tire that's fast and great handling, too. It features a supple 180-thread-per-inch casing, a bead-to-bead layer of DuraSkin, and a Kevlar-reinforced top layer. The result is a lightweight tire that rolls and corners with the best of them while providing flat protection and durability second to none.

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years