Filter By:
- Bar Ends (1)
- BMX (1)
- Bottom Brackets (33)
- Brakes/Levers/Pads (80)
- Cables (26)
- Cassettes/Freewheels (38)
- Chainrings (29)
- Chains (34)
- Show More Categories
- Cranksets (19)
- Derailleurs (35)
- Forks (3)
- Handlebar Grips/Tape (40)
- Handlebars (20)
- Headsets (8)
- Pedals (59)
- Saddles (23)
- Seatposts (11)
- Shift/Brake Combinations (8)
- Shifters (19)
- Stems (28)
- Other (133)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm
$22.00
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains
Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.
Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.
Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.
Cost effective stopping power from the leader in cable-actuated disc brakes.
- All calipers have 74mm mounting bolt spacing
- For use with with long cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Includes steel-backed organic pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Rotor Included: No
- Weight: 215 g
$18.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$30.00 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$33.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No
$9.99
With a stiff, one-piece, co-molded design, Box Three™ Air Flow Brake Shoes provide the excellent stopping power and are the perfect choice for your next build. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. Pivoting posts aid installation and make toe-in adjustments simple and easy.
$51.99
The Box Four cassette adapts our Prime 9 philosophy of durability, simplicity, and reliability at a great price point. All cogs are stamped from steel, given our durable black coating and then the larger cogs are pinned to each other with spacers for easy installation.
- Compatible with HG freehub bodies
- Steel stamped cogs
- No spiders
- Wide ratio and consistent progression
- ED black protection
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm
- Comfortable and durable kraton rubber with a classic micro diamond knurled surface
- 130mm length with closed end and BMX style flange
- Forged alloy brake levers with reach adjustment
- Compatible with linear pull and mechanical disc brakes
- Left/Right: Set
- Fits 22.2mm (7/8") handlebars
$10.00
- Best seller
- Shock Absorbing Design
- Ridged Turbo Shape
- Fits 7/8" Bars
- Style: with Flange
- Length: 110mm
$10.00
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use
- High flange BMX style design with black press-in end plugs
- Length: 145mm
$15.00
Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip.
- EPB bearing system
- Spindle size: 9/16-inch
$20.00
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
$30.00
Forged alloy platform pedals with a hardened chromoly spindle.
- Molded pins
- Size: 9/16-inch
$370.00
Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.
Campagnolo's Athena Front Derailleur is compatible with both standard and compact cranksets. Its steel cage moves the chain effortlessly between the chainrings and it features an anti-friction coating for quiet, sublimely smooth shifting.
Campagnolo Cable Anchor Assembly Caliper Brake Part
The Campagnolo Chorus front derailleur provides immediate, responsive upshifting with extreme precision.
- Upper semi-rod not connected to the lower one for more effective, precise movement and no contact with travel limit
- The derailleur stops transmission contact and friction to improve maximum cross-chaining situations
- Designed to accommodate tires up to 32mm without the risk of contact with the derailleur
- Double-position fixing of the cable allows for maximum compatibility with frames and tires
- An optimized position for every engaged sprocket means limited risk of contact with the chain
Specifications:
- Derailleur Capacity: 16
- Front Der/Shifter Compatibility: Campy Centaur/Potenza/Chorus/Record/Super Record 2015+
- Max Ring (teeth): 52
- Front Derailleur Style: Traditional
- Front Derailleur Cable Pull: Bottom Pull
- Front Derailleur Clamp: Braze-on
- Drivetrain Speeds: 12
- 52 tooth 11 speed Campagnolo chainring, for use with 36 tooth threaded inner chainring
- Compatible with 2011-2014 Super Record, Record, Chorus and Comp Ultra cranksets
- 110mm BCD
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
• Italian: 70mm
• English: 68mm
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$15.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
Page 1 of 22
Next page