Brakes/Levers/Pads

Compatibility: Shimano XTR, XT, SLX, M985, M785, M666, S700 2011+

The Clarks 854C brake pads are specifically designed for use in disc brakes and provide reliable braking performance for various bicycle models, including Tektro Volans, Auriga, Twin, and Auriga Sub. These brake pads are made from organic material (resin), which ensures smooth and effective braking power while minimizing wear on the brake discs. Weighing only 0.01 kilograms, they are lightweight and do not add to the overall weight of the bike. Manufactured in the United Kingdom, these brake pads guarantee high quality and durability. They are an excellent choice for cyclists who prioritize safety and performance. The 854C brake pads are easy to install and offer an optimal fit for the mentioned Tektro models, making them a practical solution for the maintenance and replacement of brake components.

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- High performance compounds recommended for all-conditions - Steel backing

Shimano Road Compatible Disc Brake Pads

- Cast steel calipers, ideal for MTB and hybrid cycles - Includes rubber boots and brake noodles - Linear pull - 20.6 - 40.6mm reach - Front & Rear - Black - Boot & Noodle - 20.6-40.6mm

Compatibility: Avid BB5 / Box Three / Promax DSK-300

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

The Tektro 837AL caliper is a durable and lightweight linear pull brake designed for MTB - Melt forged aluminum - 102mm arm length - Steel hardware - Material: Aluminum

Compatibility: Shimano XTR 2007 (M965-M966), Saint, Deore LX 2005 Pad Material: Organic

Die cast alloy calliper, ideal for MTB and Hybrid cycles. Supplied with pads. - Die cast alloy construction - Linear pull brake - 55mm rubber brakes shoes Inc. - Steel guide pipe and rubber boot Inc

Single piece, 1.8mm thick rotor made from high quality 120 CR grade steel

Single piece, 1.8mm thick rotor made from high quality 120 CR grade steel

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Shimano Saint BR-M810/820/8100/9120, BR-MT520/420, ZEE BR-M640 - Also compatible with Tektro Quadiem/Slate/G-Spec/Zurich and TRP G-Spec DH/DHR, Bengal Helix 4X

• High performance compounds recommended for all-conditions • Steel backing

- High performance compounds recommended for all-conditions - Steel backing

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Forged aluminum lever with cast aluminum clamp - 2-finger length ergonomic lever blade - Compatible with Linear pull brakes - 81 grams per side - Black/Silver - Pair

- Forged aluminum arms - 102mm arm length - 158g

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 88g each

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Tektro disc brake rotors are crafted with corrosion resistant stainless steel. - Rotor offers less noise from vibration - Designed for use with 2-piston disc brake calipers - 1.8mm thickness - Includes (6) mounting bolts and T25 torque tool

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.