Brakes/Levers/Pads

Clarks Bicycle V-brake 115mm complete brake set (F&R w/ levers, cables, & hardware) SILVER - V-brake caliper and lever set including all cable housing, fixings and stainless steel guide pipes - Kits includes: 2x Caliper sets, front and rear brake cables, x2 rubber boots, brake noodles, 4x caliper bolts 2x cable ends - Hinged lever clamp for easy installation - Integrated cable adjusters - 55mm rubber brakes shoes - Die cast alloy construction

Affordable disc brake set that utilizes a wider pad design (XTR M965/966 style) for improved efficiency and stopping power - Suitable for E-Bikes but does not include disconnect switch or compatibility - Compatible with standard post mount and IS mount frames - Includes front and rear calipers, rotors, pads, and 12 rotor bolts

Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

Shimano Road Compatible Disc Brake Pads

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders Features: - Water Grooves - Dual Compound - Rim Friendly Compounds: - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Shimano Saint BR-M810/820/8100/9120, BR-MT520/420, ZEE BR-M640 - Also compatible with Tektro Quadiem/Slate/G-Spec/Zurich and TRP G-Spec DH/DHR, Bengal Helix 4X

• High performance compounds recommended for all-conditions • Steel backing

- High performance compounds recommended for all-conditions - Steel backing

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.

Odyssey A Brake shoes for all your braking needs.

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair

Origin-8's Multi-Sport Bar End Levers are for caliper and cantilever brakes and can be used on touring, base and areo-extension handlebars. They're made of light and reliable forged aluminum for excellent braking power and long life. - Forged AL6061-T6 alloy construction - Compatible with caliper & cantilever brakes - Fits 19-20.5mm ID bar ends - 160g pair