Brakes/Levers/Pads

Compatibility: Shimano XTR 2007 (M965-M966), Saint, Deore LX 2005 Pad Material: Organic

Die cast alloy calliper, ideal for MTB and Hybrid cycles. Supplied with pads. - Die cast alloy construction - Linear pull brake - 55mm rubber brakes shoes Inc. - Steel guide pipe and rubber boot Inc

Single piece, 1.8mm thick rotor made from high quality 120 CR grade steel

Single piece, 1.8mm thick rotor made from high quality 120 CR grade steel

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Shimano Saint BR-M810/820/8100/9120, BR-MT520/420, ZEE BR-M640 - Also compatible with Tektro Quadiem/Slate/G-Spec/Zurich and TRP G-Spec DH/DHR, Bengal Helix 4X

• High performance compounds recommended for all-conditions • Steel backing

- High performance compounds recommended for all-conditions - Steel backing

The 1999 Sidepull Brake is a lightweight brake kit for BMX. - Includes brake, lever and cable - Reach is 66-90mm

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed, and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment - Qwik-Adjust Barrel Adjuster - Bend Zone - All weights per pair - All levers are compatible with mechanical disc brakes and linear-pull brakes

- Forged aluminum arms - 102mm arm length - 158g

- Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad Style ID: 31 - Compatibility: Shimano M8020/M820/M460 / TRP Quandiem - Pad Material: Sintered - Backplate: Steel

- Cast steel calipers, ideal for MTB and hybrid cycles - Includes rubber boots and brake noodles - Linear pull - 20.6 - 40.6mm reach - Front & Rear - Black - Boot & Noodle - 20.6-40.6mm

Compatibility: Avid BB5 / Box Three / Promax DSK-300

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

The Tektro 837AL caliper is a durable and lightweight linear pull brake designed for MTB - Melt forged aluminum - 102mm arm length - Steel hardware - Material: Aluminum

Shimano Road Compatible Disc Brake Pads

- High performance compounds recommended for all-conditions - Steel backing

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Die cast alloy bracket and lever, for thumb shift and twist shifter use - Compatible with both U & V brake calipers

Compatibility: Hayes GX-2, MX-2, MX-3, Sole Compound: Sintered

Compatibility: Shimano XTR, XT, SLX, M985, M785, M666, S700 2011+

The Clarks 854C brake pads are specifically designed for use in disc brakes and provide reliable braking performance for various bicycle models, including Tektro Volans, Auriga, Twin, and Auriga Sub. These brake pads are made from organic material (resin), which ensures smooth and effective braking power while minimizing wear on the brake discs. Weighing only 0.01 kilograms, they are lightweight and do not add to the overall weight of the bike. Manufactured in the United Kingdom, these brake pads guarantee high quality and durability. They are an excellent choice for cyclists who prioritize safety and performance. The 854C brake pads are easy to install and offer an optimal fit for the mentioned Tektro models, making them a practical solution for the maintenance and replacement of brake components.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Constructed from steel and nylon •4 finger •217g pair

Compatibility: Promax DSK320, DSK400, DSK610J, DSK50J, DSK700, XNine

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

•Compatible with most road caliper brakes •All weather compound

• DIN standard design with anti-corrosion hardware • All weather compound • Centered post

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

• All weather compound • Cantilever post style • Black • 52mm

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

• Side pull caliper design • Includes levers, calipers, cable and housing • Steel construction • 780g set

Compatibility: Tektro IO Mechanical, Aquila, Novela (Pre-2010) Compound: Standard

Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders Features: - Water Grooves - Dual Compound - Rim Friendly Compounds: - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

- More durable and quiet resin compound than previous DB-210 pads - Anti-vibration elastomer behind pad further reduces noise - Magnetic spring in caliper & physical spring between pads for fast and consistent pad return - Visual wear indicator shows if your pads need to be replaced, without removing them - Chamfering at the bottom eases wheel insertion, for race-fast wheel changes - Loops at top of the pads act as cooling fins for improved heat dissipation

- Brake Pad Inserts: Designed for eeBrakes - Compatible with SRAM / Shimano systems - Light Blue – Aluminum Compound - Dark Blue – Carbon Compound - 11g per set

Compatibility: Hayes 9 Carbon, 9 HD, 9 XC, HD, HFX-9, HFX Mag, MX-1, Plus, XC / Promax Hyd & Mech

Compatibility: Clarks EXO, Skeletal, Magura Marta 2002-2008, Marta SL Compounds: organic

Compatibility: Campagnolo Road Disc / Magura MT2, MT4, MT6, MT8, MTS (2012+)

BRAKE SHOES CLK DISC SINT SRAM RIVAL22/F

Compatibility: Shimano Ultegra, Br-GRES805, BR-GRE505.

Compatibility: Clarks CMD 19/20/21

Enhanced wear life and wet braking performance Compatible with Shimano style cartridge holders Item Specifications - Brand Compatibility: Shimano/Avid - Length of Pad: 70mm - Pad Color: Black

Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.