Tires

Continental's Gatorskin is a super long-wearing and reliable tire that's fast and great handling, too. It features a supple 180-thread-per-inch casing, a bead-to-bead layer of DuraSkin, and a Kevlar-reinforced top layer. The result is a lightweight tire that rolls and corners with the best of them while providing flat protection and durability second to none.

The Throttle tire is great for expert level riders wanting a more advanced tire. The Throttle tire’s 100psi high-pressure construction will be able to hold up under tough conditions and tricks. Grips well at the skatepark, on the trails, or in the streets. - HP 100PSI - Grippy Eastern Formula - Performs great on all surfaces - Large Eastern hotpatch for a bold look

Kenda Koncept is a strong, durable, lightweight tire with an excellent value for recreational riders. A file type tread pattern provides low rolling resistance and tight cornering in all road conditions. - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

The Kwick Drumlin is hard to beat: K-Shield protection and a long lasting compound make it a reliable companion. Burly side knobs give confidence and grip on wet or loose conditions. Feels at home on concrete as well as gravel paths and forest roads.

The S-6 Black Steel Tire in K23 Tread is a great tire for any road bike. - K23 tread pattern - Made from quality Kenda rubber - Wire bead

High-volume commuter tire - Dual-compound rubber - High-volume casing Inspired by our dirt track racing tire from our motorcycle division, the Maxxis DTR-1 is sure to up the cool factor on your townie bike. Featuring a high-volume, durable, 60 TPI casing and dual-compound rubber, the DTR-1 will get you where you're going and look good doing it.

- New tread design, improved compound and quality workmanship - The Schwalbe One sets a new benchmark in terms of quality and performance

The old dream pairing reunited. Rapid Rob uses the former profile of Racing Ralph and for many years it has proved an attractive entry-level model. - K-Guard: Consists of natural rubber and is reinforced with KEVLAR fibers. Together with the 50 EPI carcass, the tire is well protected against punctures. - Wire Bead

The Fast Trak Control 2Bliss Ready T5 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Compound: GRIPTON T5. - 26 x 2.35", PSI 25-50, approximate weight 605g.

Specialized's Ground Control GRID is an exceptionally versatile trail tire. CAD engineered knob shapes strengthen knob structure for optimum braking and traction, but keep knob surfaces adaptable for best ground control. The GRIPTON compound helps make this the perfect choice for epic trail rides in any condition. Specialized recommends GRID tires for anyone seeking the utmost in flat and sidewall protection. - Bead: Foldable - Butyl wrapped bead, 2Bliss Ready - Compound: GRIPTON - 650b x 2.1" psi 25-50; approximate weight 680g - 650b x 2.3" psi 25-50; approximate weight 740g - 650b x 2.6" psi 20-40; approximate weight 915g - 650b x 3.0" Max Ride 25 psi / Max Install 35 psi; approximate weight 1000g

The new Slaughter Grid 2Bliss Ready tire has been designed for heavy-pedal, hard-pack riding—receiving vertically stepped knob shapes for more knob core stability and additional biting edges. Fast courses on hard-packed ground require a light, fast tire center to keep speeds high, but must also keep the speed through loose sandy corners and track well under hard braking. For these reasons, we've kept the high shoulder knobs. Our GRIPTON compound, meanwhile, improves high frequency damping, better attaching the tire to the ground over small bumps and rough sections alike. This also means that the low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy to be absorbed and keeping your speed high. Please note that we recommend GRID tires for anyone seeking the utmost in flat and sidewall protection or additional stability. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 650b x 2.3", PSI 25-50, approximate weight 825g - 650b x 2.6", PSI 20-40, approximate weight 950g - 650b x 2.8", PSI 15-30, approximate weight 1040g

- City/commuter sidewall protection - Kevlar reinforced for puncture resistance

- Cruiser tire intended for everyday use - CB - Cable Bead, type of bead found on economically friendly folding tires that provides a durable, easy to install tire bead - 30 TPI

- Street/vert tire with bead-to-bead, siped, lightly grooved tread - Wire bead - Size: 24 x 2.4

- Recreational tire with raised center, slight lateral grooves for traction - Size: 24 x 1 3/8

- Easy-rolling on/off-road compound - Knobs spaced for grip in the dirt and grass - Continuous center tread for a smooth ride

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 12 1/2 x 2 1/4

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 20 x 1.75

Park/street tire, with directionally grooved tacky tread. - ISO: 203 - Bead: Wire

Kenda K-Rad - Checkerboard-shaped knob design - Knurled tread surface for traction and control - Ribbing between knobs strengthens the casing - Kenda endorses the use of fluid based sealants only in specifically designated Kenda sealant compatible tire

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

- Kenda model K40 - Intended for street use

- Versatile tread with good grip and easy rolling - MTB tire at a low price

The Ground Control tire is such a great trail tire, we have adapted it for all sizes and ages. This tried-and-true design features CAD-engineered knob shapes, which strengthen the knob structure for optimal braking and traction, but it keeps the knob surfaces adaptable for the best possible grip on mountain trails. - Casing: 26 TPI - Bead: Wire - Compound: 60a - 20x2.35", 25~50 - 24x2.35", 25~50

- Street/park tire with near rim-to-rim tread, tacky surface, medium grooved - Wire bead - Size: 12 1/2 x 2 1/4

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

- Entry-level Freestyle tire with durable casing to prevent pinch flats - Wire bead - Size: 16 x 1.75